[DML] Testing Lambda thermal switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Testing Lambda thermal switch

Using the MYDELOREAN.NET How-to guide #19, I get an open circuit 
between pin 7 and chassis ground for the test in step 3 with the 
engine cold, which indicates a failed switch or wiring. I get open 
circuit when the engine is warmed up, which is supposedly correct. How 
else can I test the thermal switch without removing the intake 
manifold and entering "the valley". I don't believe I have any weird 
idling symptoms, except for a little hesitation (like it wants to skip 
cylinders) when I press the gas when the engine is cold. Is this a 
possible symtom of a bad thermal switch?




To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive