[DML] Inline diode to ECU bad????
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Inline diode to ECU bad????

I just used the #13 How-to guide from MYDELOREAN.NET, for testing the 
idle speed switch. I tested the switch itself, and it's fine. I also 
have continuity through the black/green wire from the switch to the 
inline diode. Also, from the "upstream" side of the diode, I get 0 
ohms between that and the chassis ground with the gas pedal at rest, 
and about 27 ohms once I press the pedal (open the switch) However, I 
do not get the <few hundred ohms on the other side of the diode, which 
is pin 8 of the cable, per the guide. I get totally open with the gas 
pedal at rest (switch closed) and when pressed (between pin 8 and 
chassis). Is the diode bad? How can I test the diode itself? Can I get 
locally at an autoparts store, or do I need to order from a D vendor?




To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive