[DML] Re: WANTED: Angle Drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: WANTED: Angle Drive



Well we had the problem with the lower speedo cable, 
but in the end each part has to be analyzed for not 
to put too much force on the angle drive.

Without testing and analyzing this any further 
discussion about it is useless !





> Yes, the cable that comes out of the angle drive that
> goes in to the plastic cap.  If that cable is too
> long, it will bind once the cap is on.
> 
> I say the cable too long, but the actually length
> should be correct for most cars.  It is possible your
> car has some other problem that is making the cable
> stick out of the hub too far.
> 
> Did you also replace the large nut that holds the
> angle drive in place?




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive