[DML] Re: Fuel gage not working
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Fuel gage not working

Hi Ed,

The foil the circuit is printed on has a habit of getting defective at 
the "finger" positions inside the area where the connectors are.
Some of my circuit fingers got disconnected. After glueing them to the 
foil, the problem was over. Your problem may be alike and may 
have "fingers" that connect to another causing the disfunction of your 
fuel gauge.


--- In dmcnews@xxxxxxxxxxxxxxx, "Ed & Roxie Cohen" <rdcejc@...> wrote:
> I recently replaced the printed circuit board on the instrument 
> Now my fuel gauge is not working it reads over full all the time.  Any
> suggestions as to what the problem is.  The gauge never read full 
> even with a full tank of gas all it would do is read ¾.
> ED
> 6944
> [Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive