[DML] Aligning idle speed motor to to pipe
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Aligning idle speed motor to to pipe



I'm having a heck of a time re-installing the Idle speed motor hose and
pipe that feeds into the air/fuel unit.
 
I inserted the pipe into the air/fuel unit before angling that into
position, but I cannot get the rotation of the tube right, or something.
I just cannot get this all back together properly, although I've done it
before.  I've just decided to give up for the night.  Any advice
appreciated.
 
Tom


[Non-text portions of this message have been removed]



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive