[DML] Re: Aligning idle speed motor to to pipe
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Aligning idle speed motor to to pipe

Push the air intake flap wide open and you can see the tapered end of 
the brass pipe as you put it in - this often helps with seeing what you 
are doing wrong. 

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, "Tom Tait" <TTait@...> wrote:
> I'm having a heck of a time re-installing the Idle speed motor hose 
> pipe that feeds into the air/fuel unit.
> I inserted the pipe into the air/fuel unit before angling that into
> position, but I cannot get the rotation of the tube right, or 
> I just cannot get this all back together properly, although I've done 
> before.  I've just decided to give up for the night.  Any advice
> appreciated.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive