[DML] Rack & Pinion problems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Rack & Pinion problems

I noticed a clunking noise after unloading my car off my trailer from 
Pheasant Run.  I finally got around to checking on it today and the 
right front wheel had some slop in it.  I took off the wheel and 
noticed the slop is inside the boot(passanger side) on the rack and 
pinion steering.  I slid the boot off and a bunch of plastic crumbs 
came falling out.  It looks like it may have been a bushing in the end 
of the steering unit. I haven't been able to find a part on any of the 
vendors sites.  Do I need to replace my whole rack and pinion unit or 
can I simply replace the bushing.  Any suggestions would help as I have 
a show on the 4th of July and also the parade.  If I ran it a few miles 
without this bushing, would this be unsafe or cause any major damage?


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive