[DML] Re: Doors....again
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Doors....again



Good advice concerning torsion bar adjustment - I had one that was
over torqued, had delaminated and bent the metal piece that the
torsion plates attach to, twisted the splines on the bars, etc. -
actually had to fabricate a puller in order to remove the plates while
holding with the breaker bar...

anyway, DMC Houston has a very nice replacement for the "valance":
Part # 105721  -  UPR SCREEN RR FINISHER - REPRODUCTION

got one last year to replace one that was beyond hope - $150, looks
and fits perfect

Cliff


On Tue, 16 May 2006 22:33:46 -0000, David wrote:

<snip>
Be very careful removing the valence as they are no longer available.
<snip>





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive