Re: [DML] Water pump and internal water pipe removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Water pump and internal water pipe removal



Start with a 1/4" drive ratchet because you shouldb't be able to snap 
them with that. DOn't go heating them till you've tried that as heating 
them will make the ally of the block brittle

Martin

usndmc wrote:

>I am in the process of replacing my all-original cooling system. I 
>have been soaking the bolts for the water pipe and water pump with 
>penetrating oil for a few days. Tomorrow morning I am going to get a 
>propane torch for heating the bolts before removing. I don't have much 
>experience with this sort of thing and was just looking for any tips 
>or advice on how to remove these bolts without breaking them. Also, if 
>they do happen to break, I've heard it's a real pain to drill them 
>out. Never done that before either...any helpful pointers on the 
>entire process would be greatly appreciated! Thanks everyone and Happy 
>upcoming New Year!
>
>Dave
>#5968
>
>  
>






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated