[DML] Water pump and internal water pipe removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Water pump and internal water pipe removal

I am in the process of replacing my all-original cooling system. I 
have been soaking the bolts for the water pipe and water pump with 
penetrating oil for a few days. Tomorrow morning I am going to get a 
propane torch for heating the bolts before removing. I don't have much 
experience with this sort of thing and was just looking for any tips 
or advice on how to remove these bolts without breaking them. Also, if 
they do happen to break, I've heard it's a real pain to drill them 
out. Never done that before either...any helpful pointers on the 
entire process would be greatly appreciated! Thanks everyone and Happy 
upcoming New Year!


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive