Re: [DML] Re: angle drive replacement question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: angle drive replacement question

dmc_5180 wrote:
> Owen ,
> I think it's about 200 ft pounds. Either way, if you don't have a torque wrench to measure 
> it. Just tighten it as tight as you can without a cheater bar. It will be plenty tight for all 
> practical purposes.

Thanks for the info.  Since that nut appears to attach the axle to the suspension, I don't want it coming loose!


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive