[DML] Re: DeLorean Dents
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: DeLorean Dents



--- In dmcnews@xxxxxxxxxxxxxxx, "carpenter12740" <mattdcarpenter@xxxx>
wrote:
>
> I have 
> two dents on the bonnet I need to correct.  

Did you call Kenneth Vance, the person Ben Ferguson recommended in
Maricopa?

I don't know if dents in the hood can be repaired because you can't
"pick & file" the metal due to the fiberglass piece underneath that
the stainless steel is attached to. I think you would have to cut out
a section of fiberglass below the dent so it can be raised then filed
down 'till even, then patch the fiberglass section that was cut out.
I'm guessing a new hood would be cheaper?

Dan W.
VIN 16192
AZ-D







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated