[DML] Re: Other quality PJ Grady parts (request)

["d_rex_2002" <rich@xxxxxxxxxxxxxxxxx>]

Rob and list,

I know Rob has been selling quality products for a while, but
sometimes less expensive similar parts flood the market and it
is no longer cost effective to continue selling some of these
quality parts.  Case in point, the HCR speedo angle drives.

While I agree with Rob's statement that there are mainy thrifty
DeLorean owners out there that are looking for the best price
for parts, there are some parts where many owners would prefer
higher quality over lower price.  I also realize there are quite
a few DeLorean owners out there that do not put a lot of miles
on their DeLoreans annually, so the low cost part is just fine.

However, for the DeLorean owners that do put a lot of miles on
their DeLoreans, it does become tiresome and expensive to have
to replace a failed angle drive (even with a free warranty part)
since there are labor costs and time involved with replacement.

Rob, if you decide to start a poll or two about parts to build
or build again, put me down for a half dozen HCR angle drives.
I have seen several posts here over the past year from other
owners who would prefer doing this repair once rather than often.

Later,
Rich W.

--- In dmcnews@xxxxxxxxxxxxxxx, <rob@xxxx> wrote:
>
> Nate & the DML group,
> 
> Thank you for purchasing our circuit boards. Over the years since we
> introduced (1994 I believe) them we have sold well over a thousand 
of our
> "Life-Time" guarantee boards which fortunately for us have proven to 
be
> extremely reliable. Our warranty rate is less than one percent 
compared to
> an approximately seventy five percent failure rate (My best 
guess-timate!)
> of the stock boards. 
>
> snip <







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/