Re: [DML] Hard start issue?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Hard start issue?

I have this problem too...
I am somewhat certain it is the TTS, but haven't replaced it yet.
John- turn the mixture screw which way? I don't want to mess up the idle or 
mixture too much. And no, my car doesn't die at idle or stopping, runs great 
all the time ,just starting in that same temperature range.


On 9/9/05, John Hervey <john@xxxxxxxxxxxxxxxx> wrote:
> Based on what your saying, I would adjust the mixture screw clock about
> 1/8th turn. The air flow meter deflection plate may no be rising the 
> control
> plunger high enough to pass fuel to the injectors.
> John Hervey
> -----Original Message-----
> From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf 
> Of
> stefan diklich
> Sent: Friday, September 09, 2005 5:48 AM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: RE: [DML] Hard start issue?
> The temperature yesterday was around 80 degrees. its weird though because 
> it
> can sit in my garage for two days and start fine cold but if it stays
> outside it wont start. its the weirdest thing, and there is no hot start

John Hervey <john@xxxxxxxxxxxxxxxx> wrote:What is the temperature where your
> are, could be the hot start problem.
> TTS switch isn't firing off the cold start valve. Either on could be bad.

[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive