[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Do you have the full time air bleeder fix?  Air trapped in the t'stat
housing can prevent water flow and it can take quite a while to get all the
air out.  I highly recommend the permanent bleeder valve fix.  Wither create
one from parts locally or check with any of the vendors.


-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of John Podlewski
Sent: Sunday, September 04, 2005 10:29 PM
To: dmcnews@xxxxxxxxxxxxxxx

Water bottle bubbles over cap removed, anytime the temp. reaches around
160F.  No Water cirucalation after that point, Fans do not come on because
no water in the coolant pipe where the ottostat is located downsteam of the
water pump (New pump).  Changed to new thermostat same result!

Then I took out the themostat completely and everything is fine,

What Gives, Anyone ever run into this before?

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive