[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


You're air-locked at the radiator. Take off the top vent hose at the 
radiator (passenger side top) until coolant starts to flow. Then 
follow the bleeding procedures in the manual.

Harold McElraft - 3354

--- In dmcnews@xxxxxxxxxxxxxxx, John Podlewski <john_podlewski@xxxx> 
> Water bottle bubbles over cap removed, anytime the temp. reaches 
around 160F.  No Water cirucalation after that point, Fans do not 
come on because no water in the coolant pipe where the ottostat is 
located downsteam of the water pump (New pump).  Changed to new 
thermostat same result! 
> Then I took out the themostat completely and everything is fine,
> What Gives, Anyone ever run into this before?
> [Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive