[DML] Re: engine pulling question.. Also upgrades.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: engine pulling question.. Also upgrades.

Look in the parts manual page 4/1/1. Did ou remove parts 7, 15, and 
16? They will hang you up on the flywheel. 

The two screws you mention are part of it - they have to come out. 
Lift the engine a bit and you can do it. Nice thing is that you can 
throw that part away and not re-install it. 

BTW - it is generally a bunch easier just to pull the whole thing, 
trans and all, especially when you go to put it back together. 

Dave Swingle

--- In dmcnews@xxxxxxxxxxxxxxx, Qumefox <qumefox@xxxx> wrote:
>> dealing with the transmission.. I've removed every bolt i've 
seen.. 3 on
> the starter, 4 on the transmission bell housing, and of course the 
2 on
> the motor mounts.. The top seems to be seperating easily but the 
> seems to be hanging on something.. I fought with this a good 3 hours
> today to the point I got sick of dealing with it. Are there any 
> i'm not seeing? I know there are two on the very bottom installed 
> the front of the car, but I can't tell they're connecting the trans 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive