[DML] Re: doors rubbing T panel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: doors rubbing T panel

You need to replace the foam under the Tee roof. It holds it up so it
doesn't rub. When you reinstall the Tee roof it need to be centered so
the gap on both doors on top is equal, you can use your fingers to
measure it.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, "Harold McElraft" <hmcelraft@xxxx> wrote:
> You can adjust (move it) left to right. Usually this alignment is to 
> get equal spacing on the rear panels where the T panel meets them. 
> But, you may need to move it to get adequate door spacing.
> Harold McElraft - 3354

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive