[DML] Re: doors rubbing T panel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: doors rubbing T panel



My driver's door rubs ever so slightly at the back corner.  When both
doors are fully open, both of the door corners touch the T-panel
corners.  I've got the driver's b-pillar weatherstrip removed at
present and the screws removed to clean the glue off.  I don't see a
way to adjust it besides vertically since the holes line up pretty
straight.  If I pop it up I'll have a gap at my rear quarters, and I
can't move it further back as it's already butted up against the b-pillar.
Can you clarify how to adjust the T-panel for us?
Thanks,

-John
#5572

--- In dmcnews@xxxxxxxxxxxxxxx, "Harold McElraft" <hmcelraft@xxxx> wrote:
> You can adjust (move it) left to right. Usually this alignment is to 
> get equal spacing on the rear panels where the T panel meets them. 
> But, you may need to move it to get adequate door spacing.
> 
> Harold McElraft - 3354
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "blackaddertoo" <blackaddertoo@xxxx> 
> wrote:
> > Hi all
> > 
> > since replacing my door struts, my doors now rub the T panel.
> > 
> > the T panel looks the correct height and alignment, the only 
> > adjustment as far as i can see is upward.
> > 
> > i can't see how upward adjustment will make the doors miss 
> touching 
> > the panel.
> > 
> > my question is do i need to adjust the T panel, or are my (UK) 
> > supplied struts too long? (does anyone have the correct length?)
> > 
> > its frustrating as everytime i open the door i know i'm damaging 
> the 
> > top edge corner of the door, only slight but when the cars your 
> > pride and joy...
> > 
> > thankyou for any help.
> > 
> > regards
> > 
> > Steve
> > VIN 1621








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive