Re: [DML] plans for torsion bar adjustment jig

["Joe OBrien" <joeyoseppijoe@xxxxxxxxx>]

Don't mind removing the louvers??????

I'd rather pull my own teeth than re-align the louvers again. The 
louvers DO NOT need to be removed to adjust torsion bars. Just use 
grady's schematic to build the jig, get the proper sickets and proper 
extensions. Tape them to make sure they don't come apart. 

Still a two man job, one moving the breaker bar, and one aligning the 
splines.

Don't remove the louvers, you'll be cussing and swearing at them for 
hours.

Matt, do you just like doing things the hardest way possible?


Joe O'Brien

2524
16634
16851




--- In dmcnews@xxxxxxxxxxxxxxx, "Matt Spittle" <supermatty@xxxx> wrote:
> 
> 
> If you don't mind removing the louvers, this job can be done with 
only
> a breaker bar, allen socket and a 4' steel pipe for leverage.  Still
> requires 2 people, though.  
> 
> Matt
> #1604








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/