Re: [DML] Very basic question about SS clutch line replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Very basic question about SS clutch line replacement



In a message dated 12/9/2003 3:16:29 AM Eastern Standard Time, supermatty@xxxx writes:

> 
> So here goes... It was my understanding that the clutch line 
> connects from the master cylinder to the slave cylinder, and that 
> the slave cylinder can only be accessed while the transaxle is out. 
> Does this mean to replace the old plastic clutch line, the transaxle 
> must come out??? The slave cylinder on my car was replaced just 
> prior to my ownership so I'm not concerned about it at this 
> time.


Not at all. the clutch line is easily removed all by itself.

Andy





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive