Correction: heater control valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Correction: heater control valve



Meant to say vacuum line into control valve is 1/16" or so (3/32"?).
Apologies.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote:
> If you mean the heater core shutoff valve, any 5/8" will do (watch
> size of vacuum nipple -- 1/8" or so). I used Factory Air #74612,
> stocked by both Autozone and Advance. Differs in appearance from
> factory (single piece step down). Is long lived however -- use same
> part number on all my Lincolns.
> 
> Bill Robertson
> #5939
> 
> >--- In dmcnews@xxxxxxxxxxxxxxx, "ablemanse" <s.ableman@xxxx> wrote:
> > Hi,
> > 
> > Somewhere I saw a after market heater control valve but now
that I 
> > need one I can't find it. Was it a Subaru? I've looked in the
archives 
> > and saw that someone bought one at NAPA but he didn't say what it
was 
> > ment for. 
> > 
> > TIA Steve 1089






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated