Re: [DML] Venting outside air over engine
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Venting outside air over engine



The photos are up (in the "Photos/Bolt of Lightning" folder). The 
digital camera I used is a bit fuzzy... but you get the basic idea.

Keep in mind that the vehicle was rolled by the previous owner (much 
like my digital camera).



--- In dmcnews@xxxxxxxxxxxxxxx, "thomaspaulmccoy" 
<thomaspaulmccoy@xxxx> wrote:
> I will try to get photos this weekend for the lists... for some 
> reason I'm not receiving e-mail consistently :(
> 
> This is actually the second attempt at the integrated panel/scoop 
(I 
> discovered that a large scoop does not match the subtle lines of 
the 
> DMC12). This most recent venture matches the style of the car 
> perfectly. For now, the scoop is cosmetic. My plan in stage 2 is 
to 
> get a brushed or chromed aluminum duct constructed that would take 
> the air and direct it onto the engine... similar to the McLaren F1.
> 
> Sincerely,
> Thomas 6921
> "Bolt of Lightening" #6921






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated