Re: [DML] Starting Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Starting Problem



Check and clean all of the electrical grounds first. Then check the starter
inhibit relay in the fuse compartment, make sure the female terminals in the
block haven't been pushed down out of the block.

Dave Sontos
vin 02573

----- Original Message -----
From: "paulus260572" <paulus29@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, December 30, 2001 8:12 PM
Subject: [DML] Starting Problem


> Hello all,
>
> The problem I'm having on starting is this sometimes when I crank the
> car over its like the battery is flat and there's hardly any reading
> on the volt gauge then all of a sudden the car will start and be fine.
> I just put new starter motor on and when I test the battery with a
> meter on tick over its about 13.7 volts and rises when you accelerate.
> Any ideas?
> P.s.I have a delco alternator but don't know what model?
>
> Cheers Paul.
>
>
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated