Re: [DML] Still locked out
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Still locked out



Bill,
Is your door stuck or your lock stuck? Is the door fully closed or only
partially latched? If your door or latch pins are not adjusted properly this
can jamb the door. If your lock is not working it may be a loose linkage
wire inside the door. You will need to remove the door Trim Pad which is
held in place with fir trees to access the linkage. (Thats the upholstered
part above the arm rest on the door).

Dave Sontos
VIN 02573

----- Original Message -----
From: <billschaferabn@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, May 29, 2000 10:19 PM
Subject: [DML] Still locked out


> Group,
>
>
> I got back one reply on the stuck lock on the drivers side door. I
tried
> the recommended solution but no dice. Has anyone else out there been
locked
> out of either door. I have tried unlocking with the key and power locks
but
> it will not come unstuck. I deduce that I need to get inside of the door
> panel but am not sure what to be looking for and where its at. i would
> appreciate any suggestions.
> Thanks,
>
> Bill
> Vin #11596
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated