RE: [DML] Upgrading the Air Filter?

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Dave,
I beg to differ. If you ever try it you'll like it. The exhaust system will
handle more out put as it stands. I'm not saying that it can't be improved
but with the modifications you seem to have never tried. You will see a
considerable difference in response to your feed foot and some HP in the
small performance changes I sell. Better low resistance silicone HP wires,
+4 Spark plugs, Hotter coil Pertronix or MSD. If the car can't breath it
can't exhaust, that why I build the new breather and filter with the colder
air input tube. The stock system is ok, and if your happy with what you have
then that's fine but you will get more with the above upgrades.
John Hervey
www.specialtauto.com





-----Original Message-----
From: David Teitelbaum [mailto:jtrealty@xxxxxxxxxxx]
Sent: Wednesday, December 01, 2004 10:34 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Upgrading the Air Filter?





To improve the breathing on the PRV you cannot just do "one side".
What goes in must also come out. You will not realize much improvement
unless you also do something to the exhaust system too. While you are
at it porting and polishing would help, camshafts, larger valves, and
so on, and so on. The PRV was a very engineered system. This means you
will not gain very much unless you do many things all at once. The
whole system was optimized with all the stock parts so there is no
"magic bullet". Some think a hotter coil will do it. In reality the
old coil was just tired so ANY new coil would be an improvement. The
"best bang for the buck" is a complete tune-up with new Bosch parts.
Then if you want to go further at least you are starting out with a
properly running baseline of performance. Performance parts can be
EXPENSIVE and will not give you a whole lot of improvement (unless the
parts you are replacing were shot to begin with).
David Teitelbaum
vin 10757


-- In dmcnews@xxxxxxxxxxxxxxx, "Mike Polzin" <MPolzin@xxxx> wrote:
>
> John,
> The system that John is selling is not a new thing, I have been
running one
> on my car for well over a year. It was initially designed by Casey








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links













To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/