[DML] Slave Cylinder-What's the best way to tackle this?

["Michael & Denise" <luckeys71@xxxxxxx>]

Hi gang,
I'm trying to replace the slave cylinder on my car and I can't for the life of me figure out how to get to it.  After putting the car on stands and crawling around for 30 minutes underneath it I realized that I could not access it like the shop manual seems to indicate.  From above I can put my hand on the rubber boot but can't seem to see a thing since it's down there a bit.  So I'm once again turning to the experts here in the group for some much needed advice-just how do you get to this darn thing?  My old one is definitely leaking fluid as the boot is wet as well as fluid having dripped onto the transmission.  Any help would be greatly appreciated!
Thanks,
Mike
#3760


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/