[DML] Re: delorean rear anti roll bar

[tobyp@xxxxxxxxxxxx]

Simon - The DeLorean was produced without a rear sway bar.  Any that 
you see out there are after market installations, probably made by 
Addco Suspension Systems.  I have an Addco rear bar on Winged1, and 
the difference is astounding in terms of cornering ability and 
traction.  I must add that the standard Addco bar and attachment 
hardware doesn't fit very well, so I have made a number of 
modifications that have resulted in a very good installation.

Toby Peterson
DeLorean Parts Northwest, LLC
www.delorean-parts.com


--- In dmcnews@xxxxxxxxxxxxxxx, "simonsays10002003" 
<simonsays10002003@xxxx> wrote:
> hi iv just been on ebay .com and noticed on a photo of a deloreans 
> rear end chassis and suspension etc it had a rear anti roll 
bar.the 
> thing is mine does not have this bar that goes from the one 
> suspension leg down and across the very bottom of the chassis 
below 
> the engine to the other side.is it supposed to thanks simon



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/dmcnews/

To unsubscribe from this group, send an email to:
 dmcnews-unsubscribe@xxxxxxxxxxxxxxx

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/