Re: [doc] Stalling problems

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

The metering head is cast iron, all the fuel lines are steel, and mig 
wire is copper coated anyway. I haven't tried s/s mig wire, but I know 
how springy the regular stuff is!

Martin

Chris Parnham wrote:

> Nick, I wouldn't worry too much about what effect a little steel wire
> would have.the RHD's have all mild steel petrol tanks and they work OK.
> (for a good few years anyway).
>
> Best regards
> Chris Parnham
> DOC 2
> RHD  vin 5638
> BTTF vin 20049
> -----Original Message-----
> From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On Behalf
> Of Nick Tomlinson
> Sent: 27 June 2005 20:25
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: Re: [doc] Stalling problems
>
> You can get stainless steel mig wire, this shouldn't rust and flake off
> rusty bits to the fuel injection system.
>
> Something about using stainless on a Delorean isn't there......like the
> throttle covers.
>
> NickT.




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---