Re: [doc] Reversing Lights
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] Reversing Lights



This happened to me a while back.  It turned out to be the reversing light
switch which is screwed in under the gearbox.  Not an expensive fix, but
check the contacts are clean first.  You can easily find the location by
looking in one of the online workshop manuals.

Regards

Chris Hawes
vin 5255

----- Original Message -----
From: "Peter Filsell" <filsellp@xxxxxxxxxxxxxxxxxxxx>
To: <doc-uk@xxxxxxxxxxxxxxx>
Sent: Thursday, November 04, 2004 10:33 PM
Subject: [doc] Reversing Lights



Hi all!

As #1772 prepares for her first MOT I have noticed that the reverse lights
have suddenly stopped working.  I have checked the light boards and bulbs at
the rear and all appears to be ok.  So, I assume there must be a
connection/spring around the gear stick area that makes contact once reverse
gear is engaged?

Any advice would be appreciated.



Peter
DOC 328 &
Vin 1772

[Non-text portions of this message have been removed]




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
Yahoo! Groups Links









DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **



Yahoo! Groups Sponsor

Get unlimited calls to

U.S./Canada



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated