Re: [DML] Angle Drive Failure Mode

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

Something inside the angle drive is always slipping - they use screw  
gears which have a 90 degreee offset with 45 degree teeth, like the  
distributor drive. ANY contamination will cause the gears to lock up

I currently have two brand new remanufactured and servicable angle  
drives for sale at $299 incl shipping.

Martin

Quoting doctorDHD@xxxxxxx:

> Does the angle drive usually fail in one particular way?  When I  disconnect
> the speedo cable from the angle drive, I can see that the drive    
> "output" does
> still turn but under a minimal load it stops turning.  That  seems to
> indicate that something inside is slipping...
>
> Thank  you,
>
> Dave Delman
> 1981 Electric DeLorean  Project
> electricdelorean.com
>


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/