[DML] ANSWERS TO MY SEVERAL ELECTRICAL QUESTIONS

[mike clemens <rmclemns@xxxxxxxxx>]

Thanks to all who responded, especially Dave D.,
 Bill R., and Greg.  Between everyone, I think I have
solved the melted wiring problem.

The single white/orange wire does indeed fasten to oil
pressure switch on the lower, drivers side engine
block, which turns the light off and on in the
instrument panel.

The relay is for the start resistor circuit.

And the white plug, which by the way 'does not' have a
black and white set of wires, but a black and "RED"
set of wires.  That was my mistake and the red wire
goes to a capacitor that is utilized in the idle speed
regulator/vacuum solenoid circuit.  As  some folks
noted, it was utilized on some cars and not on others.

Mike   TPS   1630



      ____________________________________________________________________________________
Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more!
http://tv.yahoo.com/collections/3658 


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/