[DML] Re: Wiring Side Markers to Blink With Turn Signal

["welmoedj" <joe.dalton@xxxxxxxxxx>]

Hi Shannon,

Simply do the following:
- disconnect the side marker units
- take the ground wire and connect it to the front turn signal
>> you can do so behind the front turn signal, splicing the ground 
wire from the side marker to the wire that activates the turn signal 
lamp.
In case your ground wire is corroded, replace it with a new wire. You 
also may wish to exchange the other wire and protection tube (and 
perhaps the fitting of the side marker as they may well be corroded 
due to water in the tube (in my case) and seal all afterwards.

N.B.: the side marker will flash in the same rithm as the turn signal 
with main lights off, arithmically with lights on.

Welmoed
VIN #2572


--- In dmcnews@xxxxxxxxxxxxxxx, "Shannon" <birdwells@...> wrote:
>
> Could someone send me instructions on wiring the front side markers 
to 
> flash with the turn signals? The instructions on the DMCNEWS site 
seems 
> to have it for the rear side markers only. 
> 
> Shannon Birdwell
> VIN 16113
>




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/