[DML] Gearbox overhaul
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Gearbox overhaul
- From: "Chris Hawes" <christopherhawes@xxxxxxxxxxxxxx>
- Date: Tue, 24 Apr 2007 22:11:26 +0100
My car has had one of the drive shaft lips seals leaking for some time (not
quite the 5 years I have had the car) so it is something I have always meant
to get around to. The leak has now picked up the pace a bit (gearbox was
topped up a little while back to compensate) I will need to move it up the
list to 'very soon' especially in light of below. To put it into perspective
I would probably have the odd single drop left on the garage floor per car
ride which is now a few drops every time.
My original clutch (26yrs old and 27k miles) has now started slipping since
the clutch slave cylinder started leaking and was subsequently replaced with
a new part (it is in the wars) so the gearbox will need to come out anyway.
What little rubber gaskets and other seals should I order so that I can
ensure I have no leaks in the future (from the gear box at least)?
My gearbox changes okay, but is a little notchy and the little rubbers for
the linkages that ensure a quiet, slick silent change could also benefit
from changing. Any suggestions on anything else that should be replaced or
worked on whilst the clutch/gearbox are out of the car?
Thanks in advance
Chris Hawes
#5255
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.463 / Virus Database: 269.5.9/773 - Release Date: 22/04/2007
20:18
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.463 / Virus Database: 269.6.0/775 - Release Date: 24/04/2007
17:43
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN