[DML] Re: Throttle cable spool

["David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>]

It is supposed to be split. Clean and lube it all up and put it back
together with both springs and all the "E" clips. Take your time and
adjust the quadrant link so you reliably trip the idle micro when you
release the throttle spool.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, "dadoc2791" <gekko@...> wrote:
>
> The spindle upon which the throttle cable spool sits has a nylon 
> bushing that slips down over the shaft, inside the spool.  There's 
> a "C" clip that holds the whole assembly in place.
> 
> My nylon bushing is split top to bottom and I'm not sure if it's 
> supposed to be or if it's just broken.  I can't seem to find that part 
> in any of the catalogs (probably just not looking at the right 
> diagram).  Can you help me find it and to know if it's supposed to be 
> split or if I should try to order a new one from someone?
> 
> Thanks in advance.
> 
> Craig
> 
> 07181
>




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/