Re: [DML] Performace fuel system
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Performace fuel system
- From: casey barlow <dmc1288mph@xxxxxxxxx>
- Date: Thu, 29 Mar 2007 06:27:23 -0700 (PDT)
Hi,I totally agree on the dyno time, I plan on taking my Delorean down to Mobile Al, and put it on a dyno. I am still working on the engine right now,hope to be finished with it soon. I will post the numbers I get off the dyno. Thanks to everyone for your suggestions!
joekuchan <josephkuchan@xxxxxxxxxxx> wrote: Ahh! Now I understand the pistons.
Before doing anything else you may just want to take the car to a
dyno and have them use a wideband O2 sensor to tell you what's
actually going on at this point. Making further mods or adjustments
without knowing what's happening is like trying to drive
blindfolded. The dyno time could be the best $100 you spend on this
project.
With luck, you may be pleasantly surprised to find the old K-Jet is
doing just fine, or you may learn otherwise. But there's just no
substitute for knowing.
There are some pretty cheap ways the turbo guys use to coax a little
more fuel out of a stock K-jet which may be all you need. If you're
falling way short of headroom though, you may need to do something
more drastic.
Joe
--- In dmcnews@xxxxxxxxxxxxxxx, casey barlow <dmc1288mph@...> wrote:
>
> Hi, I raised the compression ratio to around 10 to 1. Thanks Casey
>
---------------------------------
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN