AW: [DML] High, or "sticky" idle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
AW: [DML] High, or "sticky" idle
- From: "Elvis Nocita" <elvisnocita@xxxxxx>
- Date: Sat, 5 Nov 2005 09:14:50 +0100
Check the Idle speed switch, it's most likely not being pushed in all the
way.
But even 1000rpm is too high for a warm engine.
Elvis
Hey all - trying to figure out what to check out:
My car (manual) is now starting to stick at around 2500 RPM's when it is
supposed to be at idle. The car runs fine, but just idles higher than
usual. If I tap the gas pedal quickly, the idle will fall back down to the
1000-1200 range and idle there fine.
As soon as I accelerate and then re-apply the clutch then the idle jumps
right back to 2500.
Any suggestions on what to check out?
Thanks!
Michael Babb
VIN 3472
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN