RE: [DML] Cold Start Valve circuit

["Tom Tait" <TTait@xxxxxxxxxx>]

I gave up on the wiring diagram and found the schematic in the service
manual, now I get it.

It's very likely now that I actually was able to insulate the temp switch at
the waterpump by reinstalling it using Teflon tape.  Will test tomorrow
night.

If not, is there a problem with installing a spare relay into the hot start
socket till I get it sorted out?  I know the valve and the feed from the
starter are good so it should work - I'll just get rich/flooded if I crank
too long?





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/