RE: [DML] Angle Drive Cable Length .... too long?

[<rob@xxxxxxxxxxx>]

Nick,

I've seen this problem before and you're right that it's not good. Trimming
the end slightly on a bench grinder is the safest way but you could probably
do it on the car with a muffler cutter or other grinder if you're very
careful.

Rob Grady,

P.J.Grady Inc.

-----Original Message-----
From: Nick Kemp
Subject: RE: [DML] Angle Drive Cable Length .... too long?

The cable I'm referring to is the cable through the axle that is part of the angle drive.  I noticed that when I put the plastic hub on all the way that it was moving the angle drive on the other end.




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/