[DML] Re: Angle Drive Cable Length .... too long?

["Harold McElraft" <hmcelraft@xxxxxxx>]

You can either shorten the angle-drive shaft - I wouldn't recommend 
that - or just drill - from the outside end of the plastic "cup" - a 
hole that will allow the shaft to go deeper. Careful to just drill 
enough to open up the end and not to affect the square drive portion.

Is the cup new? I would recommend that you try a new one if it is 
not. An old cup can get damaged when the angle drive malfunctions.

Harold McElraft - 3354


--- In dmcnews@xxxxxxxxxxxxxxx, "Nick Kemp" <nkemp@xxxx> wrote:
>
> OK, I have never been able to get my Speedo working.  Now I have a 
new angle drive and bracket. 
> BUT ... I did see something interesting.  I pushed on the plastic 
cover until it was seated as far as it would be when the wheel is 
installed.  I noticed the angle drive moved on the other end.  The cable is up against the cup's end and exerting pressure on the angle drive.




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/