[DML] Wiring in some extra juice

[Greg Zapf <x86Daddy@xxxxxxxxx>]

I'm adding some electronics to my rear wall, beneath my window
(powered subs, etc... about 90 Watts...  probably less than 10 Amps). 
I was planning to run some 8 AWG wire (should be overkill / future
proof) from my battery's top post to this area, but I just found out
the entire battery area is enclosed in plastic and fiberglass... 
pretty well sealed.  I also noticed a huge cluster of brown wires
(constant 12V, I suspect) in the passenger side alcove behind that
wall.

What have other owners done to add some juice for any back wall
electronics?  Drill through the battery compartment, attach to the
brown wire cluster, or other?  I'd appreciate any recommendations.

Thanks,
--Greg
#2894




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/