Re: [DML] LONG! Electrical experts: Fan relay wiring help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] LONG! Electrical experts: Fan relay wiring help
- From: Chris Almy <chris.almy@xxxxxxxxxxx>
- Date: Mon, 26 Sep 2005 10:42:47 -0700
Duke,
You are getting a little bit too worked up over the circuit breaker. The
circuit breaker is completely bypassed in the different fan control modules
(including the one you bought). Your previous mechanic completely removed
it as it wasn't necessary in the setup he used as well. I wouldn't bother
trying to add it since it won't get used and wasn't the best design anyway.
As for the breaker you found, it's for the heater/AC blower motor.
If you wish to reuse the blue socket, you are pretty much finished with
that. As long as it has the two black/green wires, that's all you need. The
brown wire that would go to the breaker is not used with this fan
controller. Now all you need to worry about are the two wires on the other
controller connector. The green one on the module is ground, so that's easy
enough. The red is the trigger wire. That as mentioned goes to the wire
that was previously on the IGN terminal of those relays the mechanic added.
If you like, you can add a relay socket for these two connections or just
cut off the connector and wire them directly.
That's all there is to this! The wires that used to go to the BATT
terminals on those relays are no longer required. Just remove them from
where they split off the brown power wire. Now wrap it up in tubing or tape
to prevent shorting. Since the fan controller module gets power directly
from the battery and has it's own fuses, you don't need to worry about the
different brown wires.
Chris
VIN 4099
At 10:11 PM 9/25/2005 -0500, you wrote:
>Chris and others, thanks for the emails and info. However, I've been
>looking through the schmatic and pics of others relay compartments and to be
>honest, NONE of it makes sense. Even in the pics of others relay
>compartments I've recieved, they all pretty much look different. However,
>the red wire that's in this pic (that I originally thought was possibly
>power due to it being red but couldn't figure out why it was grounded like
>it is in this pic)
>http://temp.corvetteforum.net/c5/at88mph//ratsnest2.jpg
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN