[DML] Circuit Breaker Upgrades -- Now no-start

["usndmc" <usndmc@xxxxxxxxx>]

Hey all,

I went out and upgraded my original 25 and 35 amp blower motor and 
cooling fan circuit breakers to the 30 and 40 amp ones that I hear are 
recommended. I had to modify the wiring from the original male quick 
disconnect tabs to the post connectors to work with my new ones. I 
made sure not to mix up which wires connected to which posts, but when 
I finished and tried to start the car nothing happened. Turn the key, 
and the dash lights and radio and console clock all come on and I hear 
the click from the relay compartment but after that, nothing. No 
starter, no fuel pump. I unplugged and reconnected the RPM relay, 
checked that all the other relays were secure in their sockets, and 
checked all the fuses. What did I do?????

Thanks for any help!
Dave
#5968






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/