RE: [DML] Re: Replacing Door/Roof Seals

["Gary Hull" <Specialty@xxxxxxxxxxx>]

I use a long drill bit to keep the drill chuck away from the torsion bar and
to get the correct angle. I also cover the torsion bar with a split piece of
clear tubing. I use a small brass tube around the drill bit as a depth stop
- with the added benefit that the drill bit spins inside the tube and not
against the torsion bar/covering.

Overkill?

Gary 
IN2TIME 







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/