Re: [DML] Fan Blower Only #4 works
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Fan Blower Only #4 works
- From: dherv10@xxxx
- Date: Wed, 3 Apr 2002 22:25:47 EST
Jason, I have attached a small picture of the resistance unit. The total
ohmage between terminal 1 and 4 is 3 ohms. You can not solder if a wire is
broken. It gets to hot. It has to be crimped or replaced.
John Hervey
[Unable to display image]
<< I have been reading some past posts about the internal heater/AC
blowers however I did not seem to find some solid answers. It seems
like my D's blower motor only works on the highest level 1, 2 and 3
do not seem to work and 4 is nothing to scream about. Has any one
had any similar problems with a fix? Or maybe where to suggest to
look 1st?
>>
[Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN