Re: vents only- no heater, defroster

["Steve Rubano" <srubano@xxxx>]

oops sorry guys, Joe is right, that condition would be "Heat always 
on" got it confused. My mistake, Thanks Joe. 

--- In dmcnews@xxxxxxxxxxx, "DMC Joe" <dmcjoe@xxxx> wrote:
> Steve,
> 
> This statement is incorrect. The hot water valve is normally open, 
the valve
> closes when vacuum is applied via the AC mode switch "Max" position.
> 
> "We're here to help you"
> 
> DMC Help / De Lorean Services / <dmchelp@xxxx>
> Web Site: <www.deloreanservices.com>
> 
> ----- Original Message -----
> From: Steve Rubano <srubano@xxxx>
> To: <dmcnews@xxxxxxxxxxx>
> Sent: Sunday, November 19, 2000 2:23 AM
> Subject: [DML] Re: vents only- no heater, defroster
> 
> 
> "If there is no vacum to it, it's likely not opening up and alowing 
the hot
> antifreeze to go to your heater core to give you heat."
> 
> Steve
> > www.dmcmman.homestead.com
> >