Re: [DML] Re: vents only- no heater, defroster
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: vents only- no heater, defroster
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Sun, 19 Nov 2000 16:10:05 -0500
Steve,
This statement is incorrect. The hot water valve is normally open, the valve
closes when vacuum is applied via the AC mode switch "Max" position.
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>
----- Original Message -----
From: Steve Rubano <srubano@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, November 19, 2000 2:23 AM
Subject: [DML] Re: vents only- no heater, defroster
"If there is no vacum to it, it's likely not opening up and alowing the hot
antifreeze to go to your heater core to give you heat."
Steve
> www.dmcmman.homestead.com
>
Back to the Home of PROJECT VIXEN