Re: [DML] Power to the window motors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Power to the window motors
- From: dherv10@xxxx
- Date: Wed, 18 Oct 2000 23:07:26 EDT
Jim, The window motors draw about 5 1/2 amps as they are going up and down.
When at the bottom or the top right before you take your finger off they draw
12 1/2 to 13 amps. You might get by with a 10 amp fuse, but if someone held
the window switch up or down to long, it would blow. Hense:protection.
Hope this helps
John Hervey
Back to the Home of PROJECT VIXEN