Re: [DML] Power to the window motors

[dherv10@xxxx]

Jim, I don't have current draw on the motors, but if you have a day or two I 
will test them. Just a bit of intresting note. When I had my coolant fans out 
to rebuild. With no blades on the motors and no load, they draw about 1.5 
amps ea.. As soon as I put the blades back on then they went to 11.5 amps. 
Then they go about 2 -3 amp more when mounted up next to the radiator. I 
built a plug in module for the fan fail relay and fused them them at 15 amps 
on ea leg. Works great and not over fused.
John
11004