Re: [DML] T-Bar Discoloration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] T-Bar Discoloration
- From: "doctor who" <ohwrd@xxxx>
- Date: Fri, 02 Jun 2000 11:23:50 PDT
I have used the green 3M scotchbrite pads to clean stainless steel for many
years. They were designed for cleaning food service stainless and are
nothing like sandpaper (although the texture may feel rough to your skin). I
have food service grade stainless countertops and even after the hardest
scrubdown after a stubborn mess, the original factory brushwork is there and
the mess is not.
I'm not a metallurgirst and obviously the choice is yours, but Joe did make
the reccomendation, and based on my experience w/those pads I would have to
agree w/him, I think they'll work w/out any damage.
dr c.
From: Watkins Family <watbmv@xxxx>
Reply-To: dmcnews@xxxxxxxxxxx
To: DMC News list <dmcnews@xxxxxxxxxxx>
Subject: [DML] T-Bar Discoloration
Date: Fri, 02 Jun 2000 08:18:58 -0400
Hi Joe,
Correct me if I am wrong but isn't taking something abrasive like a
scotch-brite pad something that is not recommended for the T-bars. It
was my understanding that due any scratches would develop into fractures
that will eventually lead the bars snapping. I'm game to try it as
trying to mask off the area and paint them isn't my idea of fun, but I
just wanted to put this question out there. I know that a Scotch-Brite
pad is no where near as abrasive as sandpaper but is it soft enough to
not damage the t-bar?
The other question is, why would this area turn brown like rust?
Thanks for the advise
Tom #05732
DMC Joe Wrote:
The "barber pole" strips on the door torsion bar are a stress patterns
left
by the "ten revolution twist in liquid nitrogen manufacturing process".
The
lines are easily removed with a scotch-brite pad.
"We're here to help you"; See you in Cleveland!
DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.
Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html
To address comments privately to the moderating team, please address:
moderator@xxxx
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Back to the Home of PROJECT VIXEN